A frayed or snapped lift cable throws the whole door off balance, and a door hanging crooked on one cable is a genuine safety hazard. We replace cables and inspect the drums they wind onto.
A single-cable fix often means a second failure soon after. We explain the pair-replacement logic upfront.
A cable can slip its groove repeatedly if the drum itself is damaged, which we check before calling the job done.
Our technicians are trained to safely release and reset tension when cables are involved, not just the springs.
A same-day fix is standard for cable failures, parts already on the truck.
Each service below is handled by a technician trained specifically for this kind of repair, not a generalist guessing at it.
We replace the snapped cable and its pair, then verify even tension across both sides.
Fraying cable strands are a warning sign of imminent failure. We replace before it snaps and drops the door unexpectedly.
If the cable keeps slipping off the drum, we look for a bent drum or misaligned track causing the repeat issue.
Worn or cracked cable drums get replaced alongside the cable itself, since a damaged drum will fray the next cable too.
A door hanging crooked usually means one cable or spring has failed while the other holds. We correct both the immediate hazard and the root cause.
A quick description of the lean or jam gets the right cable gauge loaded before arrival.
Technicians carry standard cable gauges and lengths for most residential doors.
We check both cables and the drums together, then quote a flat price covering the full fix.
Cables replaced, tension balanced, and the door tested level before we leave, backed by written warranty.
“Cable kept jumping the drum every few cycles. Turned out the drum itself was cracked, replaced and fixed.”
“Explained why replacing just one cable wasn't a real fix. Makes sense once you see the wear pattern.”
“Door was jamming mid-cycle for weeks. Cable and drum issue, fixed in one visit.”
An uneven hang points to a broken cable, a failed spring, or a bent track pulling the panel off-square.
We recommend replacing both since they wear on the same cycle, and we'll explain the reasoning before you decide.
This is a genuine safety hazard, especially with people or vehicles near the door opening.
Usually a bent or worn drum groove, sometimes combined with a slightly loose cable tension setting.
Pricing depends on cable length, gauge, and whether the drums also need replacing, confirmed as a flat number before work starts.
Standard cable and drum stock means same-visit repair is the norm, not the exception.
Same-day dispatch, upfront pricing, and a written warranty on every visit.
☎ Call +1-831-293-1591From one side of Orland Park to the other, dispatch is built to reach you quickly.
Embedded Map Placeholder for Orland Park, IL